Honeywell TC-OAH061 Analog Output Module

Product Description

The Honeywell TC-OAH061, identified by the base model TC-OAH061, is described as a 6-channel analog output module for generating current signals to control field devices. The supplied specifications list a 4-20 mA output range for modulating valves, actuators, and variable frequency drives. Confirm the exact hardware revision and system compatibility before installation.

Hardware Specifications

Current Loop Interface and Channel Isolation

The module is described as generating analog current signals for field-device control. Each configured output must match the receiving device's input range and electrical interface.

The supplied information identifies channel-to-channel and channel-to-bus galvanic isolation. However, the isolation ratings, output load limits, accuracy, and fault response require confirmation against the applicable Honeywell hardware documentation.

The 4-20 mA range and 13-bit resolution are supplied specifications and should be verified against the exact part number before engineering design or replacement.

Frequently Asked Questions (FAQ)

Q: Can the TC-OAH061 directly drive a modulating valve?

A: It may provide the command signal for a valve positioner that accepts a compatible 4-20 mA input. Verify the output circuit, load capacity, and power requirements before connection.

Q: Does the TC-OAH061 support hot swapping?

A: Hot-swap capability is not confirmed by the supplied information. Check the applicable controller platform and installation manual before removing or inserting the module under power.

Q: Is the TC-OAH061 interchangeable with the TK-OAH061?

A: Interchangeability has not been established. Confirm the complete part number, hardware revision, coating designation, terminal assembly, and controller compatibility before substitution.

Field Installation Guidelines

1. Verify the module label and confirm compatibility with the installed Honeywell control system.
2. Isolate the relevant power sources and follow the site's electrical safety and lockout procedures before wiring.
3. Check the field device's input type, current range, permitted load, and loop power arrangement.
4. Route analog signal wiring separately from high-current power cables and variable frequency drive output cables where practicable.
5. Apply cable shielding and grounding according to the controller manufacturer's instructions and the site's grounding design.
6. Confirm terminal assignments and polarity against the official wiring diagram before energizing the circuit.
7. Test each output channel individually and verify the commanded current at the field-device interface.
8. Do not assume hot-swap support, isolation ratings, or fault behavior without documentation for the installed hardware revision.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.