Bently Nevada 330180-X1-05 MOD:143416-07 Proximitor Sensor
Spécifications techniques
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: Proximity Probes
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
En soumettant une demande pour cet article, vous confirmez que vous avez examiné et accepté nos Conditions Générales. Veuillez noter que toutes les transactions seront traitées hors ligne.
Demandez à un expert
Aidez-nous à toucher plus de personnes ! Partagez ce produit avec votre réseau et montrez votre soutien !
Product Description
Configured for proximity signal conditioning in a Bently Nevada 3300 monitoring chain, the Bently Nevada 330180-X1-05 MOD:143416-07 (330180-X1-05 Proximitor Sensor) conditions the signal from a matched proximity probe and extension cable. The calibrated chain converts conductive-target position into a voltage for static position and dynamic vibration measurements. Correct probe family and total electrical length are required.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330180-X1-05 MOD:143416-07 |
| Brand | Bently Nevada |
| Operating Temp | -52 to +100 deg C |
| Storage Temp | -52 to +105 deg C |
| Power Consumption | Maximum 12 mA |
| Product Type | Proximitor Sensor |
| Spare Model | 330180-X1-05 |
| Compatible Probe Input | 3300 5 mm or 3300 XL 8 mm probe and extension cable |
| Supply Without Barriers | -17.5 to -26 VDC; see controlled installation drawing |
| Supply With Barriers | -23 to -26 VDC |
| Maximum Current Consumption | 12 mA |
| Output Resistance | 50 ohm |
| Supply Sensitivity | Less than 2 mV/V |
| Sensor Housing Material | A308 aluminum |
| Field Terminals | SpringLoc terminal strips |
Eddy-Current Probe Scaling and Gap Voltage
The Proximitor Sensor conditions the electrical response from a matched eddy-current proximity probe. Therefore, the probe type, extension cable, and total electrical length must match the calibrated sensing chain.
The conditioned output represents conductive-target position and its dynamic changes. Consequently, the same sensing chain can support static position measurement and vibration monitoring. Installation should verify the probe family and cable configuration before applying the signal to the monitoring system.
The supplied voltage range depends on whether barriers are present. Use the controlled installation drawing when determining the applicable supply range and field wiring arrangement.
Frequently Asked Questions
Q: Which proximity probes can the 330180-X1-05 MOD:143416-07 accept?
A: It is specified for Bently Nevada 3300 5 mm or 3300 XL 8 mm probes with the corresponding extension cable.
Q: Why must the extension cable and probe match the Proximitor Sensor?
A: The sensing chain uses a calibrated probe, cable, and conditioning sensor combination. Changing the electrical length or probe family can alter the conditioned signal.
Q: What supply range applies when barriers are installed?
A: The specified supply range with barriers is -23 to -26 VDC. Follow the controlled installation drawing for the complete installation.
Field Installation Guidelines
- Confirm the installed probe family before connecting the Proximitor Sensor.
- Verify the extension cable and total electrical length against the calibrated sensing chain.
- Use the specified supply range for the selected barrier configuration.
- Route proximity signal wiring separately from high-current power conductors and strong electromagnetic interference sources.
- Maintain appropriate cable shielding and grounding practices according to the controlled installation drawing.
- Secure field wiring at the SpringLoc terminal strips and verify conductor termination before energizing the circuit.
- Check the physical probe installation and cable continuity before evaluating the conditioned output.
- Do not assume interchangeability from a similar enclosure, base model, or mounting arrangement. Confirm the complete part configuration and any factory modification separately.
Other Attributes
- Series: 24765 and 135613 Case Expansion Transducer Systems
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The Bently Nevada
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.