TC-FXX172 Honeywell 97126772-B01 17-Slot Rack Chassis

Product Description

The Honeywell TC-FXX172 97126772-B01, identified by the base model TC-FXX172, is an uncoated 17-slot rack chassis designed to provide mechanical module support and backplane connections within a Honeywell industrial control system. The supplied description specifies a 24 VDC, 2.8 A configuration. Verify the chassis power requirements and backplane compatibility against the installed system documentation before installation.

Hardware Specifications

Note: The supplied data also lists 100-240 VAC input, a maximum input current of 10 A at 24 VDC, a 5.1 VDC logic supply, conversion efficiency above 90%, and a 13 A maximum current. These values do not form a consistent electrical specification for a rack chassis. Confirm whether they describe a separate power supply before applying them to this model.

Rack Integration and Backplane Compatibility

The 17-slot chassis provides mounting positions for compatible control-system modules. Correct installation depends on the rack dimensions, module form factor, backplane connector arrangement, and approved power distribution configuration.

The specified 24 VDC and 2.8 A values should be treated as supplied configuration data rather than verified chassis ratings. Calculate the total load from the installed modules and compare it with the documented limits of the applicable power supply and backplane. Do not infer hot-swap capability, redundant power support, or slot-level current capacity from the slot count alone.

Frequently Asked Questions

Q: How many modules can the TC-FXX172 chassis accommodate?

A: The supplied description identifies a 17-slot rack. The usable module count depends on module width, reserved positions, and the rack configuration specified by Honeywell.

Q: Can this chassis operate directly from a 24 VDC supply?

A: The supplied data lists 24 VDC at 2.8 A, but this does not independently confirm the chassis input rating. Check the model-specific installation documentation and determine whether the values refer to the chassis or an associated power supply.

Q: Does the TC-FXX172 support hot-swapping modules?

A: Hot-swap support is not established by the supplied information. Verify the permitted insertion and removal procedures for each module and the installed rack configuration before servicing an energized system.

Field Installation Guidelines

1. Verify the complete model number, including suffix and part number, against the equipment bill of materials.
2. Confirm the chassis mounting dimensions and mechanical clearances before securing the rack.
3. Inspect the backplane connectors and module guides for contamination, deformation, or damage.
4. Confirm the approved supply voltage, current capacity, grounding arrangement, and power distribution requirements using the applicable Honeywell documentation.
5. Calculate the combined load of the installed modules and ensure that the power supply and backplane remain within their specified ratings.
6. Route power and field wiring according to the system installation manual. Keep signal wiring separated from noise-generating power conductors where required.
7. Follow the manufacturer's grounding and electrostatic discharge precautions when handling modules or exposed backplane connectors.
8. De-energize the equipment before installing or removing modules unless the applicable documentation explicitly permits energized servicing

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.