Emerson Ovation 5X00454G01 Ethernet Remote I/O Base Assembly

Product Description

Configured for Ethernet remote I/O communication in the Emerson Ovation DCS, the Emerson Ovation 5X00454G01 (5X00454G01 Ethernet Remote I/O Base Assembly) provides the physical base for connected remote I/O hardware and network data exchange.

Hardware Specifications

DCS Communication and Signal Interface

The 5X00454G01 provides the physical platform for Ethernet-based remote I/O communication. Ethernet carries control-system data between the remote I/O assembly and the Ovation network.

The supplied configuration data also lists USB 3.0 and RS-232 interfaces. These interfaces support local or serial equipment connections where the specific system configuration permits them. The supplied information does not define individual port assignments, transfer rates, or connector pinouts.

For Ovation process-control installations, the actual I/O signal type depends on the connected I/O modules rather than the base assembly alone. Therefore, 4-20 mA HART, FOUNDATION Fieldbus, Profibus PA, channel isolation, and CJC functions should not be attributed to the 5X00454G01 without module-specific documentation.

Frequently Asked Questions

Q: Does the 5X00454G01 itself provide analog or digital I/O channels?
A: The supplied data identifies it as an Ethernet Remote I/O Base Assembly. It does not specify integrated analog or digital channels. I/O functions depend on the connected modules.

Q: What Ethernet communication parameters does the 5X00454G01 use?
A: The supplied information confirms Ethernet connectivity but does not specify protocol details, network speed, addressing, or redundancy parameters.

Q: What is the specified operating temperature?
A: The supplied specification lists -40 deg C to +70 deg C, with extended variants up to +85 deg C. The applicable range should match the exact hardware variant.

Field Installation Guidelines

• Mount the assembly on a mechanically stable surface and maintain access to its communication and module connections.
• Route Ethernet cables separately from high-voltage power wiring and high-current switching conductors where practical.
• Use appropriate shield termination practices for the installed industrial Ethernet cable and follow the Ovation system grounding documentation.
• Protect cable connections from mechanical stress, excessive bending, and accidental disconnection.
• Verify the installed environmental conditions against the specified operating temperature and enclosure requirements.
• Confirm the connected I/O modules and their electrical characteristics before applying field signals.
• Do not assume hot-swap capability, backplane current limits, network redundancy, or firmware compatibility unless the applicable Ovation documentation explicitly confirms those functions.

Other Attributes

• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Emerson DeltaV

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.