ABB SPTPS13 Turbine Protection Slave Module
Especificaciones técnicas
Manufacturer: ABB
Condition：New with Original Package
Product Type: Turbine Protection Modules
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Al enviar una solicitud para este artículo, confirmas que has revisado y aceptado nuestros Términos y Condiciones. Ten en cuenta que todas las transacciones se procesarán sin conexión.
Pregúntale a un experto
¡Ayúdanos a llegar a más personas! Comparta este producto con su red y muestre su apoyo.
Product Description
The ABB SPTPS13, identified by the base model SPTPS13, is a turbine protection slave module associated with ABB Symphony Plus and Infi 90 control systems. Its specific signal-processing functions, backplane interface, and protection logic remain subject to verification against the applicable hardware documentation.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SPTPS13 |
| Brand | ABB |
| Product Series | Symphony Plus / Infi 90 |
| Module Type | Turbine Protection Slave Module |
| Input Voltage | 24 VDC +/- 20% |
| Maximum Input Current | 5 mA |
| Power Consumption | 5 VDC at 450 mA typical |
| Output Frequency | 100 Hz |
| Operating Temp | 0 deg C to 70 deg C |
| Dimensions | 450 mm x 177 mm x 35 mm |
| Weight | Approximately 0.272 kg |
Backplane Communication and Hardware Compatibility
The SPTPS13 is identified as a turbine protection slave module. Before integration, verify its designated rack position, backplane interface, compatible controller hardware, and firmware requirements against the applicable ABB system documentation.
Do not assume compatibility with other Symphony Plus or Infi 90 modules based solely on product family names. Confirm the module's electrical interface and system configuration before replacement or commissioning.
Frequently Asked Questions
Q: Can the SPTPS13 be hot-swapped during system operation?
A: Hot-swap capability has not been established by the supplied information. Confirm the approved removal and insertion procedure in the applicable ABB hardware manual before removing the module from an energized rack.
Q: What backplane power requirements apply to the SPTPS13?
A: The supplied data lists 5 VDC at 450 mA typical. Verify this value against the module documentation and confirm that the rack power supply supports the required load.
Q: Is the stated operating temperature range confirmed for the installed module?
A: The supplied range is 0 deg C to 70 deg C. Verify the manufacturer's specified operating limits and installation conditions before commissioning.
Field Installation Guidelines
- Verify identification: Check the SPTPS13 model marking and hardware revision against the approved system configuration.
- Inspect the rack: Examine the module slot, backplane connector, and surrounding hardware for visible damage or contamination.
- Confirm power requirements: Verify the applicable supply voltage, current demand, grounding arrangement, and rack power capacity using official documentation.
- Control wiring interference: Route signal and communication cables separately from high-current conductors where practical. Follow the manufacturer's shielding and grounding instructions.
- Follow isolation procedures: Apply the site's approved electrical isolation and protection-system maintenance procedures before removing or inserting hardware.
- Validate operation: After installation, check module status indications, system diagnostics, and protection-system signals according to the approved commissioning procedure.
Other Attributes
- Series: Advant OCS/800xA
- Country of Origin: Germany/Sweden/Finland
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of ABB
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.