Honeywell TC-CCR014 Redundant Control Network Interface Module

Product Description

The Honeywell TC-CCR014, also identified by the base model TC-CCR014, is a redundant Control Network Interface (CNI) module intended for network communication within Honeywell Experion PKS control architectures. It supports redundant network media paths to maintain communication availability when a network path becomes unavailable.

Hardware Specifications

Redundant Control Network Communication

The TC-CCR014 supports redundant media paths for control network communication. This configuration provides an alternate communication path if the primary path becomes unavailable. However, actual switchover behavior depends on the installed network architecture and system configuration.

For installation, verify the module identity, network topology, and corresponding system documentation. Do not assume that redundant and single-media interface modules share identical hardware or configuration requirements.

Frequently Asked Questions

Q: Can the TC-CCR014 replace the TC-CCN014 directly? A: Do not assume direct interchangeability. The supplied information identifies the TC-CCR014 as a redundant-media variant. Confirm hardware compatibility, network configuration, and system revision requirements before replacement.

Q: What is the module's power consumption? A: The supplied data does not specify power consumption or backplane current demand. Consult the applicable Honeywell hardware documentation before calculating power-supply loading.

Q: Does the TC-CCR014 support automatic network failover? A: The supplied description identifies redundant media support and automatic failover functionality. However, it does not provide a switching-time specification. Verify failover behavior against the installed system configuration and applicable documentation.

Field Installation Guidelines

1. Confirm the module part number and hardware revision before installation.
2. Verify that the target chassis and control network support the intended redundant configuration.
3. Isolate power according to the approved site maintenance procedure before removing or inserting hardware.
4. Inspect connectors and module seating surfaces for contamination or physical damage.
5. Route redundant network cables separately where practical to reduce the risk of common physical damage.
6. Follow the system grounding and cable-shield termination requirements specified by Honeywell.
7. After installation, verify network status indicators and confirm communication through the configured network paths.
8. Do not perform hot-swapping unless the applicable hardware documentation explicitly permits it.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.