Honeywell FS-SICC-0001/L15 FTA Interconnection Cable

Product Description

The Honeywell FS-SICC-0001/L15, also cataloged as the FS-SICC-0001 FTA interconnection cable, operates as a dedicated hardware component for shielded signal routing and field termination assembly within Honeywell Experion PKS distributed control system cabinets.

Hardware Specifications

4-20 mA HART Loop Protocol and Channel Isolation

This interconnection cable supports 4-20 mA HART loop protocol signal transmission between field transmitters and Honeywell Series 8 I/O termination assemblies. Furthermore, the double-layer foil and braid shielding suppresses EMI/RFI coupling that would otherwise degrade analog signal integrity. In addition, channel-to-channel isolation is maintained through the individual conductor insulation rated above 100 MΩ at 500 VDC test voltage. Consequently, the cable preserves signal fidelity across multi-channel analog input applications where HART digital communication superimposes atop the 4-20 mA analog carrier.

Frequently Asked Questions

Q: Does the FS-SICC-0001/L15 support hot-swap insertion during system operation?

A: No. As a passive cabling assembly, hot-swap capability depends entirely on the connected FTA and I/O module. Therefore, power down the associated I/O loop before connecting or disconnecting this cable to prevent arcing or signal transient damage.

Q: What is the maximum conductor current rating under continuous operation?

A: Each conductor is rated for 2 A maximum at 60 VDC. However, typical 4-20 mA loop applications draw well below 0.02 A per channel. Consequently, the cable operates with substantial margin under standard process control loading.

Q: Can this cable be used with Profibus PA field devices?

A: No. The FS-SICC-0001/L15 is designed for 4-20 mA HART analog loop termination within Honeywell Experion PKS cabinets. Profibus PA requires impedance-matched bus cabling per IEC 61158-2, which this assembly does not provide.

Field Installation Guidelines

Install the cable by routing it through grounded metallic conduit or cable tray separate from high-voltage power conductors to minimize inductive coupling. Subsequently, terminate both ends with proper strain relief to prevent mechanical stress on the connector interface. Moreover, bond the double-layer shield to the DCS cabinet ground bus at one end only to avoid ground loop formation. Additionally, verify that the 20 AWG stranded conductors are torqued to the manufacturer-specified values at the termination block. Finally, inspect insulation resistance annually using a 500 VDC megohmmeter to confirm values remain above 100 MΩ.

Other Attributes

• Series: Honeywell Experion PKS(C200,C300)
• Country of Origin:  USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Honeywell

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.