Yokogawa ASD533-S00 | Digital Output Module

Configured for digital signal output in Yokogawa CENTUM CS and CENTUM VP systems, the Yokogawa ASD533-S00 (ASD533 Digital Output Module) provides physical electrical output for connected field devices. The supplied configuration data identifies isolated digital outputs, with terminal block options including ATSD3S and ATSD3D.

Hardware Specifications

Yokogawa DCS Digital Output Characteristics

The ASD533-S00 provides discrete electrical outputs for field-device actuation and status interfaces. The supplied specifications identify selectable sink or source output behavior and isolated output circuitry.

Channel isolation separates field-side electrical conditions from the module interface. Therefore, installation should maintain the specified wiring arrangement and terminal assignments for the selected hardware configuration.

The module supports ATSD3S and ATSD3D terminal block configurations. The ATSD3D option provides a dual-redundant terminal arrangement according to the supplied product information.

Frequently Asked Questions

Q: What output voltage does the ASD533-S00 support?
A: The supplied data specifies 24 VDC output, with greater than 12 V also indicated depending on load requirements.

Q: Does the ASD533-S00 provide isolated outputs?
A: Yes. The supplied specification identifies a 2500 VDC isolation voltage for the digital output interface.

Q: Can the ASD533-S00 use redundant terminal configurations?
A: Yes. The supplied data lists ATSD3D as a dual-redundant terminal block configuration, while ATSD3S provides a single configuration.

Field Installation Guidelines

• Verify the module model and terminal block configuration before wiring.
• Confirm the sink or source output arrangement against the actual field circuit.
• Keep field wiring separated from high-voltage power conductors where practical.
• Route signal wiring to minimize electromagnetic coupling from motors, contactors, and switching devices.
• Connect cable shields according to the applicable Yokogawa system installation practice and site grounding scheme.
• Confirm field-device voltage and current requirements before energizing each output channel.
• Check terminal polarity and channel assignment against the system wiring documentation.
• Do not exceed the specified output current for the connected load.
• Verify isolation requirements before connecting circuits operating at different reference potentials.
• Follow the applicable CENTUM CS or CENTUM VP hardware installation documentation for cabinet mounting and termination procedures.