Power Cable | 6FX3002-5CL01-1AF0 | Siemens

Product Description

Configured for power transmission in Siemens industrial motion and automation equipment, the Siemens 6FX3002-5CL01-1AF0 (6FX3002-5CL01-1AF0 power cable) provides direct electrical connection through four 1.5 mm2 conductors. The cable uses PVC insulation and a PVC outer sheath, incorporates an angular connector with a rotatable cable outlet direction, and has a fixed length of 5.0 m.

Hardware Specifications

Industrial Drive Connection Characteristics

The Siemens 6FX3002-5CL01-1AF0 functions as a passive electrical connection assembly rather than an active backplane communication device. Therefore, its operating behavior depends on conductor capacity, insulation integrity, connector installation, bending limits, and mechanical loading conditions.

The four 1.5 mm2 power conductors support rated voltage operation at 600 V / 1000 V. In addition, the specified 4,000 V RMS test voltage provides insulation verification for the power conductors. The PVC insulation and outer sheath define the cable construction and environmental resistance characteristics.

The angular connector permits the cable outlet direction to rotate in fixed increments. However, personnel must disassemble the connector before changing its orientation. This mechanical arrangement requires controlled installation and reassembly to maintain the specified IP65 protection level.

Frequently Asked Questions

Q: Can the 6FX3002-5CL01-1AF0 operate in continuously flexible applications?
A: The supplied data specifies a minimum flexible-installation bending radius of 155 mm and a maximum bending capability of 1,000,000 bends. Actual suitability depends on the installation motion profile, bending speed, routing method, and applied mechanical stress.

Q: What bending limit applies to fixed cable installation?
A: The minimum bending radius for fixed installation is 6 x the cable diameter. Installation personnel should maintain this radius throughout routing and cable fastening.

Q: Can the connector outlet direction be changed after installation?
A: Yes, the angular connector outlet direction can rotate in fixed increments. However, connector disassembly is required before changing the outlet orientation.

Field Installation Guidelines

Verify that the cable routing radius remains within the specified fixed or flexible installation limits before energizing the connected equipment.

Avoid exceeding the stated tensile stress of 50 N/mm2 during fixed installation or 20 N/mm2 during flexible installation. In addition, prevent torsional loading beyond the specified 30 deg/m absolute limit.

Route the cable separately from sources of excessive mechanical abrasion and sharp edges. Where the cable passes through machine structures, use suitable mechanical protection and strain relief.

Maintain correct connector assembly procedures when changing the angular connector outlet direction. Furthermore, inspect sealing surfaces and connector engagement before returning the assembly to service to preserve the specified IP65 protection level.

Do not expose the cable to oils outside the stated mineral-oil resistance condition without confirming material compatibility. Finally, confirm that the permanently installed cable environment remains within -25 to 80.0 deg C.

Other Attributes

• Country of Origin:  Germany
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of SIEMENS

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.