FS450R17KE3 / AGDR-81C IGBT Module and Gate Driver Assembly ABB

Product Description

Configured for direct gate control of a 1700 V IGBT power stage, the ABB FS450R17KE3 / AGDR-81C assembly combines the FS450R17KE3 IGBT module with the AGDR-81C gate driver interface for controlled switching in ABB converter hardware. The assembly handles gate-drive signals, isolation, and protection functions at the power semiconductor interface.

Hardware Specifications

ABB Drive and Gate-Control Interface

The AGDR-81C controls the IGBT gate interface and separates the control signal from the high-voltage switching stage. Therefore, the driver must match the electrical requirements of the associated FS450R17KE3 power module.

The FS450R17KE3 provides a 1700 V collector-emitter voltage rating and a continuous collector current rating of 450 A at a case temperature of 80 deg C. The specified repetitive peak collector current reaches 900 A for a 1 ms pulse.

The gate interface operates within the stated +/- 20 V gate-emitter voltage limit. In addition, the supplied data identifies desaturation protection and overcurrent monitoring as driver functions. These functions monitor the switching condition and support controlled response to abnormal collector-current conditions.

For ABB drive hardware, verify the complete gate-driver, IGBT module, control-board, and power-stage combination before replacement. Do not assume electrical interchangeability from the IGBT module rating alone.

Frequently Asked Questions

Q: What IGBT module does the AGDR-81C assembly use?
A: The assembly uses the Infineon FS450R17KE3 IGBT module, rated at 1700 V VCES.

Q: What gate-emitter voltage range does the FS450R17KE3 specify?
A: The supplied specification states a gate-emitter voltage of +/- 20 V.

Q: Does the AGDR-81C provide protection functions?
A: The supplied data identifies desaturation protection and overcurrent monitoring within the gate-driver interface.

Field Installation Guidelines

Mount the assembly according to the original ABB converter mechanical arrangement and maintain the specified electrical clearances of the host equipment.

Before installation, verify the complete part identification, including FS450R17KE3 and AGDR-81C. Check the power terminals, gate connections, auxiliary connections, and mechanical interfaces for damage or contamination.

Route gate-drive wiring separately from high-current switching conductors where the original equipment design permits. Maintain the existing shielding and grounding arrangement. Do not introduce additional ground paths that can create unwanted switching-current loops.

Inspect the IGBT mounting interface and heatsink contact surface before installation. Remove contamination and ensure that the thermal interface follows the equipment manufacturer's specified assembly method.

After installation, verify gate-driver connections and control-board interfaces before applying DC-link voltage. Perform insulation, gate-drive, and control checks according to the host converter service procedure.

Other Attributes

• Series: Advant DCS/800xA
• Country of Origin:  Germany/Sweden/Finland
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of ABB

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.