GE IS200TSVCH2A Mark VI Servo Terminal Board

Product Description

The GE IS200TSVCH2A, also cataloged as the IS200TSVCH2A Servo Terminal Board, provides a direct electrical interface between field devices and the GE Mark VI Speedtronic turbine control system. This two-channel barrier-type terminal board supports two coil outputs and two pulse-rate inputs for servo-valve actuation and speed-related signal acquisition. Its removable terminal blocks facilitate field wiring and maintenance.

Hardware Specifications

Servo Output and Pulse-Rate Signal Interface

The IS200TSVCH2A interfaces with external servo-valve actuators and pulse-generating field devices through dedicated terminal connections. Its two coil outputs support servo control signal paths, while the two pulse-rate inputs provide interfaces for frequency-based measurements.

The board includes removable barrier-type terminal blocks along one edge. These terminals provide access to field wiring. Multiple jumpers configure board functions, but their individual settings and electrical effects must be verified against the applicable GE Mark VI documentation.

The board also contains transformers, D-shell connectors and vertical plug connectors. The supplied information identifies compatibility with a PSVOH battery pack; the exact electrical requirements and supported configurations require confirmation from the system documentation.

Frequently Asked Questions

Q: How many coil outputs and pulse-rate inputs does the IS200TSVCH2A provide?

A: The board has two coil outputs and two pulse-rate inputs. These interfaces support servo actuation and pulse-based signal acquisition.

Q: Can the IS200TSVCH2A be installed in any Mark VI terminal board position?

A: Compatibility depends on the designated board position, system configuration, connector arrangement and associated hardware. Verify the control system drawings and GE installation documentation before installation.

Q: What electrical parameters must be checked before replacing the board?

A: Verify the terminal assignments, servo coil requirements, pulse-input signal characteristics, jumper positions and PSVOH battery pack compatibility. The supplied data does not specify input thresholds, output ratings or power consumption.

Field Installation Guidelines

1. Isolate the relevant equipment and follow the site's lockout/tagout procedures before removing or installing the board.
2. Confirm the complete part number, board revision and designated Mark VI installation position against the equipment documentation.
3. Record the existing field wiring and jumper positions before removal. Do not assume that jumper settings are interchangeable between configurations.
4. Label and inspect field conductors before reconnecting them to the removable barrier-type terminal blocks.
5. Route pulse-rate signal wiring separately from high-current switching and power conductors where practical to reduce electrical interference.
6. Apply shield grounding according to the system wiring drawings and the sensor manufacturer's requirements. Avoid introducing unintended ground loops.
7. Verify servo coil wiring, pulse-input connections, connector seating and associated PSVOH battery pack compatibility before energizing the system.
8. After installation, perform the approved control-system diagnostics and functional checks. Confirm that input signals and servo output behavior match the configured application.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.