BMXDDO1602 Schneider Electric Modicon X80 Discrete Output Module
Texniki spesifikasiyalar
Manufacturer: Schneider
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Bu element üçün sorğu göndərməklə, Şərtlər və Şərtlərimizi nəzərdən keçirdiyinizi və qəbul etdiyinizi təsdiq edirsiniz. Nəzərə alın ki, bütün əməliyyatlar oflayn rejimdə aparılacaq.
Bir mütəxəssisdən soruşun
Daha çox insana çatmağımıza kömək edin! Bu məhsulu şəbəkənizlə paylaşın və dəstək göstərin!
Product Description
The Schneider Electric BMXDDO1602 serves as the primary BMXDDO1602 Discrete Output Module utilized to execute digital actuation across Modicon X80 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDO1602 |
| Brand | Schneider Electric |
| Weight | 0.12 kg |
| Dimensions | 3.2 x 9.8 x 10.3 cm |
| Operating Temp | -10 deg C to 60 deg C |
| Power Consumption | Backplane current dependent (Module maximum 10 A) |
| Output Channels | 16 discrete outputs, solid state |
| Output Logic | Positive (sourcing) |
| Output Voltage | 24 V DC (19...30 V DC range) |
| Current per Channel | 0.625 A (0.5 A nominal) |
| Maximum Module Current | 10 A |
| Response Time | 1.2 ms |
| Insulation Resistance | > 10 MOhm at 500 V DC |
I/O Density Scaling & Backplane Integration
The BMXDDO1602 module is engineered for high-density 16-channel discrete output execution within the Modicon X80 architecture. The hardware integrates directly with the rack backplane bus, supporting deterministic data exchange and firmware flash compatibility across M340 and M580 racks. I/O density scaling allows up to 2 channel outputs to be paralleled for increased current capacity. Integrated diagnostic features include preactuator fault detection thresholds operating at less than 14 V DC for state 1 faults and greater than 18 V DC for state 0 detection.
Frequently Asked Questions
Q: What are the thermal and operational limitations when paralleling outputs on the BMXDDO1602?
A: A maximum of two outputs can be paralleled to increase total drive capacity. Load impedance must remain above 48 Ohm, and total module current must not exceed the 10 A ceiling.
Q: How does the module handle preactuator fault detection?
A: Voltage detection thresholds monitor the load circuit. A preactuator fault is registered if the voltage drops below 14 V DC during state 1 actuation or exceeds 18 V DC during state 0.
Q: Does the module support hot-swapping within Modicon X80 racks?
A: Modicon X80 backplanes support module hot-insertion and removal under power when installed in non-hazardous industrial environments with appropriate rack configuration.
Field Installation Guidelines
- Mount the module vertically on a standard DIN rail or within a Modicon X80 rack enclosure, ensuring proper clearance for convection cooling (IP20 rating).
- Terminate field wiring using compliant 20-pin removable cage-clamp or screw terminal blocks. Ensure all signal cables are separated from high-voltage power lines to prevent electromagnetic interference.
- Verify external fusing and reverse polarity protection diode integration prior to energizing the 24 V DC bus.
- Confirm proper shield grounding and enclosure continuity in compliance with EMC directives 2014/30/EU and Low Voltage Directive 2014/35/EU.
Other Attributes
- Series：Modicon Quantum
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items
| 140CRA93100 | 140CRP93100 |
| 140DDI35300 | 140NOM25200 |
| 140DDO35300 | 140ACI03000 |
| 140CPS11420 | 140CHS11000 |
| 140ACO02000 | 140CPU21304 |
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.