Bently Nevada 31000-28-10-00-026-00-02 3300 XL 8 mm Proximity Probe
Texniki spesifikasiyalar
Manufacturer: Bently Nevada
Condition：New with Original Package
Product Type: Proximity Sensors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Bu element üçün sorğu göndərməklə, Şərtlər və Şərtlərimizi nəzərdən keçirdiyinizi və qəbul etdiyinizi təsdiq edirsiniz. Nəzərə alın ki, bütün əməliyyatlar oflayn rejimdə aparılacaq.
Bir mütəxəssisdən soruşun
Daha çox insana çatmağımıza kömək edin! Bu məhsulu şəbəkənizlə paylaşın və dəstək göstərin!
Product Description
The Bently Nevada 31000-28-10-00-026-00-02, also cataloged as the 31000-28-10-00-026-00-02 Proximity Probe Housing Assembly, provides mechanical mounting support and signal interface positioning for 3300 XL 8 mm eddy-current proximity measurement systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 31000-28-10-00-026-00-02 |
| Brand | Bently Nevada |
| Product Type | Proximity Probe Housing Assemblies |
| Origin | USA |
| Weight | 1 kg |
| Dimensions | 28 x 9.2 x 7.5 cm |
| Power Consumption | Passive mechanical assembly, no power consumption |
| Probe Type | 3300 XL 8 mm proximity probe, multiple approvals |
| Probe Cable Length | 1.0 m (39 in) |
| Standoff Adapter | No standoff adapter |
| Probe Penetration Option | 2.6 in (66.04 mm) |
| Fittings | Without fittings |
| Mounting Thread | 3/4-14 NPT |
| Application Interface | Eddy-current displacement measurement mounting assembly |
Eddy-Current Probe Scaling and Rotor Dynamics Interface
The 31000-28-10-00-026-00-02 housing assembly supports the mechanical installation of Bently Nevada 3300 XL 8 mm proximity probes used for shaft displacement monitoring. Therefore, the assembly maintains the probe position relative to the rotating target surface and supports accurate eddy-current probe scaling behavior.
The 3/4-14 NPT mounting interface provides a standardized installation method for turbine, compressor, and rotating machinery monitoring points. Additionally, correct probe installation maintains the required electrical relationship between probe tip distance and output voltage.
Bently Nevada proximity systems typically validate probe gap conditions through gap voltage measurement, with common setup procedures referencing approximately -10 VDC target values for proper measurement range verification. The housing assembly itself does not generate signals but provides the mechanical alignment required for rotor dynamics analysis, vibration monitoring, and shaft position measurement.
Frequently Asked Questions
Q: What probe series is compatible with the 31000-28-10-00-026-00-02 assembly?
A: This assembly is specified for the Bently Nevada 3300 XL 8 mm proximity probe with multiple approval options.
Q: Does this housing assembly include a standoff adapter or fittings?
A: No. The configuration includes no standoff adapter and is supplied without fittings.
Q: What mounting connection does this model provide?
A: The assembly uses a 3/4-14 NPT mounting thread for mechanical installation.
Field Installation Guidelines
Install the housing assembly using the specified 3/4-14 NPT connection and verify mechanical engagement before inserting the proximity probe.
Route the probe cable away from high-current power conductors and electromagnetic interference sources. Maintain proper cable support to prevent excessive mechanical stress at the connector area.
Connect cable shielding according to the monitoring system grounding practice. Avoid creating unwanted ground loops that may affect displacement signal stability.
Before operation, confirm probe mechanical alignment, target clearance, and gap voltage values according to the Bently Nevada monitoring system installation procedure.
SEO Title: 31000-28-10-00-026-00-02 Bently Nevada Proximity Probe | New & Original Stock
Meta Description: 31000-28-10-00-026-00-02 Bently Nevada Brand New Original Stock Proximity Probe Housing Assembly with Global Shipping.
Other Attributes
- Series: 24765 and 135613 Case Expansion Transducer Systems
- Country of Origin: USA
- Lead Time: In Stock, 2 Working Days
In Stock Hot Items of The Bently Nevada
Our Competitive Brands
- - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
- - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
- - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
- - Bently Nevada 3300 System, 3500 System
- - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
- - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
- - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
TEL: +86 18030205725 E-MAIL: manskiwong@cambia.cn
Question 1: Is Our Price Competitive?
NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.
Question 2: What Is The Warranty Period?
We offer a standard one-year warranty for all new and original items.
Question 3: What Payment Methods Do We Accept?
We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.
Question 4: What Shipping Methods Do We Use?
We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.
Question 5: What Is Our Delivery Time?
Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.
Question 6: How Do We Package The Goods?
Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.
Question 7: How Can Customers Contact Us And Request A Quote?
Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.