VE4014 DeltaV Emerson M-Series Profibus DP Interface Card

Product Description

The Emerson VE4014, identified by the base model VE4014, is a Profibus DP Series 2 Interface Card for data communication between the DeltaV Distributed Control System (DCS) and Profibus DP field devices. The supplied specifications describe a single-port interface with a nominal localbus power requirement of 12 VDC at 600 mA. The association with KJ3243X1-BA1 and 12P2830X022 requires confirmation against the manufacturer's documentation.

Hardware Specifications

Profibus DP Communication and DCS Integration

The interface handles cyclic process-data exchange between the DeltaV system and compatible Profibus DP devices. Configuration must match the network's master-slave arrangement, bus parameters, device addresses, and supported communication settings.

The supplied information identifies redundant master configurations as a supported arrangement. However, redundancy behavior, switchover time, and compatible controller or interface combinations require confirmation from the applicable DeltaV hardware documentation.

Profibus DP uses differential signaling over its physical bus. Correct cable topology, termination, shielding, and grounding help maintain signal integrity. Keep communication cables separated from high-voltage and high-current wiring where practical.

Frequently Asked Questions

Q: What is the nominal localbus power requirement?

A: The supplied specification lists 12 VDC at 600 mA. Confirm the actual carrier power budget and module requirements before installation.

Q: Does the VE4014 support redundant Profibus DP master configurations?

A: The supplied description states that redundancy is supported. Verify the required hardware combination, system configuration, and failover behavior before commissioning.

Q: Can the VE4014 communicate with any Profibus DP field device?

A: Compatibility depends on the device's Profibus DP implementation, configuration, supported data exchange, and DeltaV integration requirements. Confirm device compatibility before connecting it to the control network.

Field Installation Guidelines

• Verify the complete module part number and hardware revision against the DeltaV system documentation before installation.
• Confirm carrier compatibility, slot assignment, and available localbus power capacity.
• Inspect the Profibus DP connector and cable for physical damage before connection.
• Follow the applicable Profibus DP wiring topology and termination requirements. Apply termination only at the designated bus endpoints.
• Maintain appropriate cable shielding and grounding according to the manufacturer's installation instructions.
• Route communication cables away from power conductors and sources of electromagnetic interference.
• Configure network addresses and communication parameters before enabling process-data exchange.
• For redundant configurations, verify the supported hardware arrangement and test communication recovery under an approved commissioning procedure.

Other Attributes

• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Emerson DeltaV

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.