Emerson 5X00497G01 REV08 4-Slot I/O Base Unit

Product Description

Configured for physical module mounting and backplane signal and power distribution in the Emerson Ovation DCS, the Emerson 5X00497G01 REV08 (5X00497G01 4-Slot I/O Base Unit) provides the mechanical and electrical base for up to four compatible I/O modules.

Hardware Specifications

Ovation DCS I/O Base and Signal Distribution

The 5X00497G01 REV08 provides the physical mounting position and electrical interconnection point for compatible Ovation I/O modules. The four available module positions establish a compact I/O assembly within the control cabinet.

The base unit distributes the associated power and backplane connections to installed modules. Therefore, the actual field signal type, channel count, and electrical loading depend on the installed Ovation I/O cards rather than the base unit alone.

The supplied specifications identify 24 VDC auxiliary cabinet power and current capacities of up to 500 mA per channel and 2 A total. These values remain dependent on the associated module configuration.

Frequently Asked Questions

Q: How many I/O modules can the 5X00497G01 REV08 accommodate?
A: The base unit provides four module positions for compatible Ovation I/O modules.

Q: Does the base unit itself define the field signal type?
A: No. The installed I/O module determines the applicable field signal and channel characteristics. The base unit provides the mounting and electrical interconnection structure.

Q: Can technicians replace an I/O module without shutting down the complete system?
A: The supplied data identifies hot-swap support when compatible Ovation I/O cards are used. The applicable Ovation system installation procedure should determine the permitted replacement conditions.

Field Installation Guidelines

Install the base unit on the specified cabinet or DIN-rail mounting surface and maintain mechanical alignment between adjacent hardware. Secure the assembly before inserting I/O modules.

Route power and field wiring separately where the cabinet design requires electrical noise control. Keep signal wiring away from high-current switching conductors and motor or drive cables.

Terminate cable shields according to the applicable Ovation cabinet grounding design. Avoid uncontrolled shield connections that can introduce ground-current paths.

Before energizing the assembly, verify the 24 VDC supply polarity, terminal identification, module orientation, and connector engagement. Confirm that the installed I/O modules match the permitted Ovation hardware configuration.

Do not infer channel ratings from the base unit alone. Verify the electrical loading and field wiring requirements against the documentation for each installed I/O module.

Other Attributes

• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of Emerson DeltaV

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.