951-1058-FD GE Industrial Automation Module

Product Description

Configured for industrial control system data processing and hardware interfacing, the GE 951-1058-FD (951-1058-FD Industrial Automation Module) provides direct physical and electrical execution within compatible GE control system architectures. The available identification data confirms the manufacturer and model; however, the exact I/O function, backplane assignment, power requirement, and product series require verification against the installed hardware documentation or nameplate.

Hardware Specifications

GE Control Bus and Firmware Compatibility

GE industrial control hardware commonly exchanges operational data through dedicated backplane or system communication paths. Therefore, the GE 951-1058-FD should be installed only after confirming its mechanical position, electrical interface, firmware revision, and system compatibility.

Firmware flash compatibility can affect module recognition and system startup behavior. In addition, verify the installed controller software and hardware revision before replacing an existing module. Do not assume compatibility solely from similar GE part numbering.

Frequently Asked Questions

Q: Can the GE 951-1058-FD be installed in any GE PLC rack?
A: No. The exact GE product series and rack interface must be verified before installation. Similar manufacturer branding does not confirm backplane or connector compatibility.

Q: Is the power consumption of the GE 951-1058-FD available?
A: The available technical data does not specify a power consumption value. Check the module nameplate, system manual, or rack power budget documentation before installation.

Q: Can firmware compatibility affect module replacement?
A: Yes. The controller firmware and module hardware revision can affect startup recognition and communication. Verify compatibility before replacing or commissioning the module.

Field Installation Guidelines

Confirm the exact GE system series and hardware position before connecting the GE 951-1058-FD. Isolate system power according to the applicable control cabinet procedure before inserting or removing the module.

Inspect the connector, mating interface, and module enclosure for mechanical damage. Maintain separation between signal wiring and high-current or high-voltage conductors where applicable. Use the cabinet grounding and cable shielding method specified for the installed GE control system.

Before energizing the system, verify module orientation, connector engagement, rack compatibility, controller configuration, and firmware requirements. After startup, check system diagnostics for module recognition and communication status.

Other Attributes

• Series: GE Multilin 350 Feeder
• Country of Origin: USA
• Lead Time: In Stock, 2 Working Days

In Stock Hot Items of The GE General Electric Mark VI 

Our Competitive Brands

• - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT
• - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
• - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
• - Bently Nevada 3300 System, 3500 System
• - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
• - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
• - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider

 TEL: +86 18030205725     E-MAIL: manskiwong@cambia.cn

Question 1: Is Our Price Competitive?

NEW-GEN collaborates with over 50 countries worldwide. As a leading supplier in China, we can provide significant discounts to customers based on market demand.

Question 2: What Is The Warranty Period?

We offer a standard one-year warranty for all new and original items.

Question 3: What Payment Methods Do We Accept?

We accept 100% T/T (Telegraphic Transfer) before shipping. For items with a lead time, a 30% deposit is required in advance, with the remaining 70% balance due before shipping. If you have an agent in China, please contact us for RMB transfer.

Question 4: What Shipping Methods Do We Use?

We primarily utilize carriers such as FedEx, DHL, UPS, BRE, etc. If you have an account with any of these carriers, you can arrange the shipping yourself. Additionally, we offer free shipping to China freight forwarders.

Question 5: What Is Our Delivery Time?

Typically, delivery takes around 1-3 days after receiving the advance payment. For items with a quoted lead time, delivery will occur as per the specified lead time.

Question 6: How Do We Package The Goods?

Our packaging process involves multiple layers of protection. Initially, the product is placed in its original box, sealed with a label. Then, we add a layer of bubble wrap to safeguard against collisions during transportation. Finally, all products are securely packed in sturdy boxes for further protection.

Question 7: How Can Customers Contact Us And Request A Quote?

Customers can inquire via email, WhatsApp, WeChat, Skype, or any preferred communication platform. Simply reach out to us, and we'll promptly provide a quote tailored to your needs.