{"product_id":"330104-00-09-10-12-05-bently-nevada-3300-xl-8-mm-proximity-probe","title":"330104-00-09-10-12-05 | Bently Nevada | 3300 XL 8 mm Proximity Probe","description":"\u003ch2\u003eBently Nevada 330104-00-09-10-12-05 3300 XL 8 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eConfigured for non-contact shaft displacement measurement in the 3300 XL transducer system, the \u003cstrong\u003eBently Nevada 330104-00-09-10-12-05\u003c\/strong\u003e (\u003cstrong\u003e330104\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe) provides eddy-current measurement of shaft relative vibration, axial position, and rotational behavior.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e330104\u003c\/strong\u003e - 3300 XL 8 mm Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e - 0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e09\u003c\/strong\u003e - 90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Cable Length\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e - 1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector and Cable\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e12\u003c\/strong\u003e - Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e - CSA, ATEX, and IECEx approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eStainless steel armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-09-10-12-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e330104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Principle\u003c\/td\u003e\n\u003ctd\u003eEddy-current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Measurements\u003c\/td\u003e\n\u003ctd\u003eShaft relative vibration, axial position, rotational speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM10 x 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eFluidLoc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Operating Range\u003c\/td\u003e\n\u003ctd\u003e0.25 mm to 2.3 mm (10 mils to 90 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale Factor\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) nominal with a standard 3300 XL Proximitor sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Rating\u003c\/td\u003e\n\u003ctd\u003e70 bar (1,000 psi) differential pressure at the probe tip and case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e90 mm case length; other dimensions not specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eNot specified in the supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Scaling and Signal Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330104 probe uses an eddy-current sensing principle to measure the distance between the probe tip and a conductive shaft target. The specified nominal scale factor is 7.87 V\/mm (200 mV\/mil) when the probe operates with a standard 3300 XL Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003eThe 2.0 mm (80 mils) linear range supports shaft displacement measurement within the specified operating region. Therefore, installation must maintain the probe-to-target gap within the applicable measurement range.\u003c\/p\u003e\n\u003cp\u003eThe FluidLoc cable construction limits oil and fluid migration along the cable path. In addition, the ClickLoc connector provides the specified probe-to-cable interface.\u003c\/p\u003e\n\u003cp\u003eFor rotor dynamics applications, the probe output represents shaft motion relative to the stationary probe position. Consequently, probe orientation, target geometry, gap setting, and cable routing affect the resulting vibration measurement.\u003c\/p\u003e\n\u003cp\u003eThe probe assembly also supports cross-talk control through the defined probe, cable, and Proximitor configuration. Install adjacent measurement channels with appropriate physical separation and follow the applicable 3300 XL system wiring practices.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What measurement principle does the 330104-00-09-10-12-05 use?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It uses eddy-current sensing for non-contact measurement of shaft displacement. The system can process this signal for relative vibration, axial position, and rotational measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What scale factor applies to this probe?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The nominal scale factor is 7.87 V\/mm (200 mV\/mil) when paired with a standard 3300 XL Proximitor sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What environmental approvals are specified for this configuration?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The supplied configuration includes CSA, ATEX, and IECEx approvals. Installation must match the applicable hazardous-area requirements for the complete transducer system.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the M10 x 1 threaded probe securely in the designated machinery mounting position.\u003c\/li\u003e\n\u003cli\u003eSet the probe gap according to the applicable 3300 XL installation and calibration procedure.\u003c\/li\u003e\n\u003cli\u003eVerify the conductive shaft target provides the required sensing surface and clearance.\u003c\/li\u003e\n\u003cli\u003eRoute the FluidLoc cable away from mechanical abrasion, excessive bending, and sources of electrical interference.\u003c\/li\u003e\n\u003cli\u003eKeep probe signal cabling separated from high-current power wiring where practical.\u003c\/li\u003e\n\u003cli\u003eMaintain connector cleanliness during installation and ensure the ClickLoc connection is fully engaged.\u003c\/li\u003e\n\u003cli\u003eVerify probe polarity, cable termination, and Proximitor compatibility before commissioning.\u003c\/li\u003e\n\u003cli\u003eFor hazardous-area installations, verify the complete probe, cable, connector, and associated monitoring equipment against the applicable CSA, ATEX, and IECEx installation requirements.\u003c\/li\u003e\n\u003cli\u003eConfirm the measured gap and electrical output before placing the machinery protection channel into service.\u003c\/li\u003e\n\u003cli\u003eDo not infer probe condition from vibration data alone; inspect mounting, cabling, connectors, and target geometry when abnormal readings occur.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":53313004536117,"sku":"330104-00-09-10-12-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/0789\/6885\/files\/330104-00-09-10-12-05.jpg?v=1786960548","url":"https:\/\/www.newgenplc.com\/af\/products\/330104-00-09-10-12-05-bently-nevada-3300-xl-8-mm-proximity-probe","provider":"New-Gen Automation Limited","version":"1.0","type":"link"}